All households urged to take a meter reading TODAY to avoid extra charges
Families are being urged to take a meter reading today – before the higher energy price cap comes into effect.
From 1 April 2022, the increased cap will be introduced, raising average annual energy bills by £693. That’s an increase of 54%, leading to concerns about how much energy bills will cost. This comes at a time when household finances are being squeezed from all angles, with National Insurance also on the rise for some people.
Gareth Kloet, energy spokesperson at GoCompare, says: “…If there’s a way to shave money off your bills this April, we would urge all bill payers to take both gas and electricity meter readings on March 31 and make sure you submit these to your supplier.”
Why do I need to take a meter reading on 31 March?
Households are encouraged to submit a meter reading to their supplier on 31 March. This is to make sure that they are not charged the higher April rate for energy they actually used in March. Taking a reading means you have proof of how much energy you used before 1 April ahead of the new rate coming into effect and will help ensure your bill is accurate.
If you can’t submit your reading on the day, then make sure you take photos that clearly show the meter readings on this date.
How do I submit a meter reading?
You can submit a meter reading to your supplier by post, phone or online via your supplier’s website or app. Some suppliers may also have an online chat or text service you can use. With prices going up so much, your supplier’s phone lines may be extremely busy. Submit your reading online or via your supplier’s app rather than phone if you can.
Those with a smart meter may assume that their 31 March reading will be sent automatically. But this is not necessarily the case. Your meter may not be set up to send a reading on 31 March. You can always send an additional meter reading to your supplier via their website or app.
Kloet continues: “It’s absolutely worth taking a meter reading before these increases come into effect. By doing this, it simply means your energy company cannot charge you at the higher rate for any units that have been used prior to April 1st”
If you are on a prepayment meter, you may still have time to top up your credit before the cap increases. But you’ll need to act fast. But bear in mind that there may be a limit on how much credit your meter can hold at any one time.
How to read your meter
This depends on the type of meter you have, and whether you pay single rate or two rates. Most people pay a single rate. Those with an Economy 7 meter will pay two rates – one for off-peak usage, another for peak usage. If you’re not sure how many rates you pay, you can check a recent energy bill to find out.
Reading an electricity meter
In general, if you have a single or two-rate meter, simply read the numbers from left to right, ignoring any numbers in red or after a decimal point.
For a dial meter, you record the figures shown on each dial from left to write. You can ignore any numbers in red. When the pointer is between two numbers, record the lower number. If it’s between the 9 and 0, record 9.
When the pointer is directly on a number, first check the next dial to the right. If the dial on the right reads 8 or 9, then lower the reading for the dial with the pointer directly on the number.
How to read a gas meter
Gas meters can be read in the same way as electricity meters. You might see that the gas meter measures in cubic metres (m3) or feet (ft) rather than kilowatt hours (kWh). Your supplier converts it into kWh on your bill.
How to read a smart meter
Smart meters normally send readings to your supplier automatically. But as we’ve mentioned, your meter may not be set up to send a reading on 31 March.
When it comes to reading a smart meter, this also depends on the kind of smart meter you have.
You may have a smart meter with:
- a keypad
- a green button labelled A
- A and B labelled buttons
- or one with no buttons at all.
You can check your supplier’s website or visit our sister brand Look After My Bills for instructions on reading each type of smart meter.
What if I have a prepayment meter?
For a prepayment meter you should press the blue button and scroll through to screen H. This will show you your meter reading. If you pay two different rates for peak and off peak usage, the rates will be shown on screens H and J.
Video of the Week
The post All households urged to take a meter reading TODAY to avoid extra charges appeared first on GoodtoKnow.
from GoodtoKnow https://ift.tt/IhjpDJb
via IFTTT
Comments
Post a Comment